[STEF]

admpassthru -- Enable/Disable OSX software audio passthru.
admpreload -- Set the adm preload amount
admvsync -- Toggle ADM vsync synchronization
AllDrives -- Allows all drives to act as media drives. (Type 'AllDrives -1' for help)
AllocateMem -- <no description>
AllocChecker -- Toggles the memory allocation tracking gear on/off
answer -- Present a popup with 1-3 choices, and return the response
AROaddClient -- adds a machine name or IP address to the list of authorized clients for the Avid Remote Objects server
AROdebug -- enable or disable debugging statements in the Avid Remote Objects server
AROlog -- enable or disable logging traffic for the Avid Remote Objects server
AROremoveClient -- removes a machine name or IP address from the list of authorized clients for the Avid Remote Objects server
AROstart -- starts the Avid Remote Objects server
AROstatus -- display status for the Avid Remote Objects server
AROstop -- stops the Avid Remote Objects server
asserT -- Assert that a given condition is true or generate an exception.
audiodma -- Meridian audio DMA buffer control
AudioHWCalibration -- Displays and allows for setting the software side of Audio Hardware Calibration
AudioRateMonVerbose -- Set AudioRateMonitor console logging
AudioThread -- Use thread for Audio
AvHLockDebugTogglE -- <no description>
aviddevicehwunderrun -- Enable/Disable HW Underrun detection.
aviddeviceinfo -- Get FireBOB Information from the hardware
AVXRedrawRate -- Change the millisecond rate that background windows are refreshed
AVXToggleAltFrameOpt -- Toggles GetAlternateFrame UI Optimization
BuildTrace -- <no description>
ChangeProjType -- Change the project type
CheckCommands -- <no description>
CheckDecks -- Re-initializes serial communications with decks
checkmem -- <no description>
CheckMob -- Attempts to diagnose a broken mob.
CheckSequences -- Check sequences for errors
CkPE -- <no description>
cleanupdatabases -- <no description>
ClearPE -- <no description>
ClearProtocolErrors -- Resets protocol error logs
CloseAllAVXPlugins -- Close down all AVX plug-ins
cmd_setImportSlideLength -- Sets the number of frames for subsequent imports of single frame graphics.
cmdDumpPrecomputes -- Display a list of precomputes for the current project
CoalesceMem -- <no description>
CompactMeM -- <no description>
Console -- Type 'Console help' for complete help.
consoleloG -- Turns Console logging on and off.
consolelogofF -- Turns Console logging off.
consoleWindow -- Get or set the size and position of the console window.
ConvertColorSpace -- When on, converts 709 HD to 601
CoreEvent -- Type 'CoreEvent help' for complete help.
CoreEventLogger -- Type 'CoreEventLogger help' for complete help.
CountThings -- Display count and list of all consumers/converters/producers in current pipes
DebugMenu -- <no description>
DebugWin -- <no description>
DesktopSampleOffset -- Set the sample offset to sync desktop audio and video
DeveloperDongleMode -- Enables or disables DeveloperDongle privileges
DigitalCutDelay -- <no description>
DigitalCutFrames -- <no description>
digitalCutPlayDelay -- Set the timeout value to wait before starting player when doing Digital Cut
DigitalCutPlayerCycles -- Set minimum player cycles for UI update.
Disable3D -- Disables 3DFX on subsequent launches
DisableFastResize -- Disables the fast resizer on Windows
DisplayControllerTraffic -- Display controller messages to Composer
dms -- DMS Test
DontWrite -- Enable/Disable DIDWriter
DPE -- <no description>
DPEX -- <no description>
DPEXM -- <no description>
dump -- Dump system state to console
DumpAVSLBLeaks -- Dumps current AVideoSampleLB leaks
DumpComponent -- Dumps a Component to the console.
DumpDrives -- Dumps internal drive list.
DumpHeapInfo -- <no description>
dumpinputmixer -- Dump state of input mixer
DumpLocalVolumes -- Dumps LocalVolume list.
DumpMachineAttributes -- Displays template attributes for each machine
DumpMachineTemplates -- Displays deck templates read into system
DumpMaxPeaks -- Display Audio Meter Max Peaks
dumpmetertimestats -- Dump stats on the meters
DumpMob -- Dumps a Mob to the console.
DumpPaneRegistry -- dumps the contents of the QA Partner pane registry
DumpPlayHistory -- <no description>
dumppmr --
DumpProfileByTotal -- <no description>
DumpProtocolErrors -- Displays serial communications errors
DumpRecordMon -- Dumps to the console the composition in the Record Monitor.
DumpSlots -- Dumps to the console the pending memory alloc/lock (slots) list
DumpSourceMon -- Dumps to the console the composition in the Source Monitor.
DumpVolumeGroups -- Dumps list of VolumeGroups.
DumpVolumes -- Dumps internal volume list.
echo -- Enables or disables echoing script commands to the console.
Enable3D -- Enables 3DFX on subsequent launches
EnableBinDialogue -- Toggles displaying Bin dialogue to user during Bin operations
EnableFastResize -- Enables the fast resizer on Windows
enableHD -- Reset the firehose board and get out of the decoder hung state.
EnablePCEdit -- <no description>
EnableSWCC -- Enables software color correction
exiT -- Exit a script.
Expect -- Assert that every line in a block will generate a given exception.
exportOMFI -- Export an OMFI composition.
FakeDeck -- Uses a 'virtual' deck for deck control
fatal -- Abort a script with an assertion 'fatal' error message.
fillmem -- <no description>
FixOMFIMobInSrcMon -- <no description>
ForceVideoUnderrun -- Forces video underruns. (Type: 'ForceVideoUnderrun -1' for full help.)
foreach -- Foreach statement using a comma separated list.
forEachBinMob -- Executes a command for each Mob.
forEachMob -- Executes a command for each Mob.
GammaConform -- GammaConform toggle 8 bit color correction gamma control range between 16-235/0-255
Global -- Create a global variable.
GraphPlayerPipes -- Display a graph of the player pipes from the current player
help -- Help the user.
iF -- iF statement (scripts only).
Single-statement if structure:
iF cond THEN stmt [ELSE stmt]
iF condition THEN statement
[ELSE statement]
iF condition
THEN statement
[ELSE statement]
Multiple-statement if structure:
iF condition
THEN Statement-List
END iF
iF condition THEN
Statement-List
ELSE statement
iF condition
THEN Statement-List
ELSE Statement-List
END iF
If statements are valid in scripts only.
iNewsDebug -- Temporary debugging for iNews Capture Mgr Control
LockMixdownMem -- Toggle locking down of memory for mixdowns
Log -- Open a log file or close the current log file.
LogAVSLBLeaks -- Enables/Disables logging of AVideoSampleLB leaks
LogCalls -- Direct all calls to Avidtalk commands into the logfile.
LogClaims -- <no description>
LogLocateBuffers -- Enables/disables locate buffer log
LogTest -- Test the log file triggers
MarkToLoopDelay -- <no description>
MarqueeDebug -- Enable/Disable Marquee debug messages
MaxBrushStroke -- <no description>
mem_more_masters -- <no description>
MemClearTotals -- <no description>
MemPrintStats -- <no description>
MeridienColorFX -- Rotates hue on all color effects in sequence
MeridienDSK -- <no description>
mixtool -- Open deprocated mix tool
MobDumpOptions -- Sets display options for dumping Mobs to the Console.
MobSummary -- Displays a one-line summary of a Mob.
MonitorProtocol -- Select protocol to monitor
MotionFXSize -- MotionFXSize on/off
msm -- Type 'msm help' for complete help.
MsmIsOnlineFileCheck -- true means IsOnline uses filesystem (slower, accurate) vs cache (faster, less accurate).
MultithreadFX -- Enable/Disable multithreaded rendering of FX
on -- Define an event handler.
openBin -- Open a Bin.
OpenProject -- <no description>
OsPrintf -- Enables/Disables OsPrintf. Type 'OsPrintf help' for complete help.
PaneIDkey -- sets up F12 to be the Pane Dump key
PauseToStopDelay -- <no description>
PlayEvent -- Type 'PlayEvent help' for complete help.
PlayLength -- <no description>
playStats -- play stats command
Plog -- <no description>
powerman -- Enable/Disable handling Power Management broadcast messages from OS
preloadSafe -- set preload mechanism to old way
PrintACFDefinition -- List the registered ACF Component definitions.
PrintPlayerPipes -- Display the player pipes from the current player
PrintPlayHist -- <no description>
PurgeAllUnreferenced -- <no description>
put -- Store expression into a variable.
QAPdebug -- turns on and off debugging statements in QA Partner extension functions
QAPexceptions -- <no description>
QAPidleProc -- <no description>
QAPinit -- register QA Partner extension functions
QAPtoolManCounters -- <no description>
QuitMC -- Exits from the MediaComposer application
ReaderCache -- Enables/disables reader caching for sample mode play
RecreateTitleMedia -- <no description>
Redir -- <no description>
RenameMediaFiles -- <no description>
reneW -- Resets the problem and error counters.
RepairKNMasks -- <no description>
RepairKNStart -- <no description>
RepairMob -- Attempts to repair a broken mob.
RepairSequences -- Check sequences for errors and attempt to repair errors
repeat -- General looping keyword.
ResampleCapturedAudio -- Turn on/off DV audio resampling during capture
RestoreMaxALBMSize -- Restores the maximum size of the Locate Buffer Manager to its default - Requires relaunch
RestoreMaxStreams -- <no description>
Run -- Load a script file & execute any non-definition commands.
The script file name is taken literally and must not be enclosed in quotes.
Run -- Load a script file & execute any non-definition commands.
The script file name is taken literally and must not be enclosed in quotes.
RunScript -- Load a script file & execute any non-definition commands.
The script file name may be any string expression.
RunScript -- Load a script file & execute any non-definition commands.
The script file name may be any string expression.
SB -- <no description>
ScratchMode -- ScratchMode [0 = dup, 1 = both]
SetAudioLoopPlayPerformance -- <no description>
SetAudioTestingState -- <no description>
SetAVX2DebugLevel -- Set the verbosity of console reporting.
SetConstantBinTitles -- Toggles modification to the bin name in the window title
SetDoNotRetFromPlay -- If (1) then play will NEVER allow the UI to update.
SetEcho -- Flag to echo all executed commands to the console.
SetMaxALBMSize -- Sets the maximum size of the Locate Buffer Manager - Requires relaunch
SetMaxStreams -- <no description>
SetMixdownConserve -- Set mixdown memory conserve factor
SetMonitorExceptionVerbosity -- Sets the user feedback level used by the AMonitorPane when it encounters player exceptions
SetMouse -- Set mouse play parameters
setnamefile -- sets preempting input for AFileDialog::NameFile.
path - path to be used during preemption
null args echos the current values SetPE -- <no description>
SetPEmask -- <no description>
SetPEsize -- <no description>
SetPlayerUIbalance -- This command alters the delicate balance that adjusts the UI update frequency vs Player underruns/dmfas
SetPrecompAutoDelete -- Enable/Disable automatic deletion of unsaved precomputes
SetRenderThreadWait -- Change the amount of time the scheduler waits to let the render thread run
SetRescanWarnings -- <no description>
SetResizeType -- SetResizeType [1 = nearest neighbor, 8 = anti-aliased bilinear, 9 = polyphase]
setrunoncebuffer -- Enable/Disable direct sound run once capture buffer.
SetShowBuildPipes -- Display the player pipes whenever the pipes are rebuilt
SetSleepTime -- Set time to sleep between null events
SetUndoMan -- <no description>
SetUpdateWhilePlayingOn -- Set whether globalState should be updated during play.
SetVideoVitalsFromTrackGroup -- Enable/Disable SetVideoVitalsFromTrackGroup
SetVolumeLatency -- Slows down the volume's I/O to simulate the slow volumes. Latency is in msec
showbptime -- Toggles display of build pipes times in the console
ShowCmd -- Hidden command to enable using hidden commands.
ShowMixdownMemStats -- Toggle showing mixdown memory statistics
ShowVolumeInfo -- Shows the information about all volumes
Standby -- <no description>
StatTest -- <no description>
StepToTrim -- <no description>
Subsys -- Control the debug parameters
SuppressUnderruns -- Turn suppression of underruns on/off. (Type: 'SuppressUnderruns help' for help using this command.
testerr -- <no description>
testNew -- <no description>
ThreadedPlay -- Sets the use of player thread
tmDump -- <no description>
tmDumpAllMethodLists -- <no description>
tmDumpAllTools -- <no description>
ToggleACFClientMonitorForAVX -- Toggles use of ACF Client Monitor for avxInstance_v1:rawToVideoBuffer.
ToggleAVXRedraw -- Toggle background redrawing when plug-in UI is up
ToggleAVXResizing -- Enable/Disable AVX effect resizing
togglerunmetersinplaycmd -- Toggle doing the meters directly in PlayCmd
toggleStatSpace -- Toggle statistics space calculation
ToggleWFfailLoudly -- Toggle advanced waveforme engine propagating exceptions
ToggleYUV -- Toggles use of board for 1:1 <-> YUV
TopOffStream -- Turn topping off of stream on/off. (Type: 'TopOffStream help' for help using this command.
tracefd -- Enables and disables file dialog tracing.
TrimToUpdateDelay -- <no description>
UseEvertz -- <no description>
UseSWRTFXScheduler -- Use the scheduler designed specifically for SWRTFX player pipes
ValidateConfig -- Validates the current deck configuration against the decks actually connected.
verbosE -- Sets the level of information that goes to the screen. Verbose level must be between 0 and 5. 0 means don't echo anything, 5 means echo it all. Standard level is 4.
VideoThread -- Use thread for Video
VTRE -- Accesses VTR Emulation debug information. Type 'vtre help' for more info.
VTRE -- Accesses VTR Emulation debug information. Type 'vtre help' for more info. VTRE -- Accesses VTR Emulation debug information. Type 'vtre help' for more