RED Build 17 en version Beta

[Uniweb]

Cette nouvelle version du firmware de la RED apporte

• le support des carte CompactFlash de 16Go
• le support du timecode dans la sortie HD-SDI.

[Pascalboy]

Bonjour,
j'ai trouvé sur Reduser ça :

Build 17
* Addition of RAW exposure meter.
* Addition of 4K HD recording mode (3840 x 2160 pixels).
* Support for RED 16GB CF cards and RED-RAM 64GB flash drive.
* Addition of embedded time code in HD-SDI outputs.
* Addition of embedded audio in HD-SDI outputs.
* Addition of CROSS JAM (creation of 23.98 fps from 29.97 timecode)
* Addition of CROSS GEN (creation of 29.97 fps from 23.98 timecode)
* Improved JAM SYNC operation: removed requirement to record before syncing.
* Genlock (Tri-Level Sync) available when operating with OPEN GATE.
* Added GPI trigger functions - Pre-Record, Shut Down, Play Clip, Next Clip.
* Added ability to disable GUI elements - EVF menus and Grey Scale defaulted OFF.
* Added ability to defeat EVF menu controls when EVF menu display is set to OFF.
* Added warning screen to advise if media is removed without first Unmounting.
* Non-speed verified CF cards now permitted to record at 2K RAW resolution.
* Resolved RED-LCD sometimes tearing in lower 10% of screen with 4K footage.
* Re-sized system error messages from full screen to upper central area of GUI.
* Added flashing "RECORD dot" within GUI to indicate system error.
* Resolved 29.97 fps Time Base QuickTime reference file issue with long record times.
* S4/i Lens Data Interface (requires corresponding Lens Interface hardware).
* Allow lens Distance data reporting in Feet or Meters.
* Revised audio PPM metering (requires corresponding Revision 2 audio board).
* Addition of Audio LINE input gain control 0dB / 10 dB.
* FALSE COLOR exposure meter tracks VIEW selection - REC709 / REDspace.
* Added user programmable Safe Action / Title guides.
* Changed MAGNIFY to display 1:1 native sensor resolution.
* Added selection to playback clips using CLIP or CAMERA LOOK values.
* Added USER PREFERENCE file.